BREWING Directions

1
Check List
Verify equipment and ingredients
2
Boil
Boil water. You will need at least a gallon of sterile water for a variety of small tasks. Start by boiling about 1 gallon of water for 10 minutes and let it cool, covered, to room temperature.
3
Clean and Sanitize
Clean and sanitize. It may seem strange to the first-time brewer, but probably the most important thing in brewing is good cleaning and sanitization. Clean all equipment that will be used during the brew with a mild, unscented dish detergent, making sure to rinse well. Some equipment will need to be sanitized for use after the boiling stage. You can easily make a simple sanitizing solution by filling the fermentor bucket with 5 gallons of water and adding 5 tablespoons of chlorine bleach (a concentration equivalent to 1 TBS/gallon, or 4 ml/L). Soak all items that need to be sanitized in this bucket for 20 minutes. After soaking, dump the sanitizing solution and pour in some of the pre-boiled water for a quick rinse to remove any excess sanitizer. Place the small spoon and the thermometer in the yeast starter jar and cover it with plastic wrap. Cover the fermentor with the lid to keep it clean. (See Chapter 2- Preparations, for more info,)
4
Wort
1.5 hours
Boil the brew water. In the brewpot, bring 2 gallons of water to a boil. Pour this water into the fermentor and leave it to cool. Now bring 3 gallons of water to boil in the brewpot. You will be boiling all of the extract in just 3 gallons and adding this concentrated wort to the water already in the fermentor to make the total 5 gallons. (See Chapter - Water for Extract Brewing, for more info.)
5
Rehydrate the dried yeast. Although many people skip this step with fair results, re-hydrating it assures the best results. While you are waiting for the brew water to boil, rehydrate two packets of dried ale yeast. Put 1 cup of warm (95-105°F, 35-40°C), preboiled water into your sanitized jar and stir in the yeast. Cover with plastic wrap and wait 15